The Fiberplex VIM-1832-S-LC LightViper is an outstanding audio distribution solution. It works in conjunction with the VRK-1832 (analog) or VIS-4832 (digital) to form a powerful 32x8 fiber - optic transport system. Ideal for Stage to FOH or drive snake applications, the VIM-1832 serves as the 'tail' end. Meanwhile, the VIM-1032 splits the 32 incoming channels for monitor locations or other audio distribution points. This unit features 8 selectable audio inputs, allowing you to choose between analog line level and AES3 digital. Both the 32 audio outputs of the VIM-1832 and VIM-1032 offer both analog line level and AES3 digital signals simultaneously. The VIM-1832 acts as the clock master, capable of generating its own high - quality Word Clock or accepting an external one. In a system, there can only be one VIM-1832, and the VIM-1032 is a clock slave that depends on the VIM-1832. Both units have a fiber pass - through transmit connector, enabling daisy - chaining to additional VIM-1032 units for wider audio distribution. The system also has a 'control' connection via a TTL data port on an EtherCon connector, allowing you to connect LightViper accessory devices like the DMX4o or MD3. Key features include an analog and digital output 'tail' end, 32 sends, 8 returns, fiber - optic pass - thru, singlemode operation, and LC fiber connectors. Technical specs show it has a depth of 6.50 in, height of 1.77 in, width of 19.02 in, and runs on an AC voltage ranging from 90 to 250 Volts. It's rack - mountable, RoHS compliant, and comes with a 1 - year warranty.

Using the Fiberplex VIM-1832-S-LC is quite straightforward. First, connect it with either the VRK-1832 (for analog) or VIS-4832 (for digital) to set up your 32x8 fiber - optic transport system. When using it for Stage to FOH or drive snake applications, the VIM-1832 should be at the 'tail' end. If you need to split the incoming channels for monitors or other audio points, connect the VIM-1032. For the audio inputs, just select whether you want analog line level or AES3 digital according to your needs. Remember, the VIM-1832 is the clock master. You can let it generate its own Word Clock or use an external one. But make sure there's only one VIM-1832 in your system. The VIM-1032 needs the VIM-1832 to work. If you want to expand the audio distribution, use the fiber pass - through transmit connector to daisy - chain additional VIM-1032 units. You can also connect LightViper accessory devices like the DMX4o or MD3 using the 'control' connection. As for maintenance, keep it in a place with a temperature between 32 and 122 degrees F. Regularly check the connections to ensure they are secure. And always make sure the AC voltage is within the range of 90 to 250 Volts.