The DigitaLinx Series offers top - notch extension, routing, and switching solutions to break the limits of digital signals. The DL - PSMV62 is a brand - new addition to Liberty's lineup. It's an HDMI 1.4 and HDCP 2.2 compliant presentation switcher. With four HDMI, one DisplayPort, and one USB - C input that can charge connected devices, it also comes with mirrored HDMI and HDBaseT outputs. The HDBaseT output supports PoC and can work with the Digitalinx DL - HD70 - RX HDBaseT receiver to send 4k@30Hz/1080P signals up to 40 meters (131ft) or 70 meters (230ft) over a single CATx cable. This switcher has an external line audio input that can be added to any HDMI input and a microphone input for voice enhancement. It provides multi - view functionality with up to 20 layouts. You can control it in many ways, such as via TCP/IP, front - panel buttons, built - in web GUI, IR remote, RS232, and CEC. Key features include a 6x1+1 (HDMI & Mirrored HDBT Outputs) 4K presentation switcher with HDBT output, various input types, support for multi - view with 16 pre - configured modes and custom sizing, USB - C AV support and device charging, 4K scaling, seamless and auto - switching, multiple control options, and compliance with HDCP 2.2 and TAA standards.

Using the DigitaLinx DL - PSMV62 is easy. First, connect your devices to the available inputs - HDMI, DisplayPort, or USB - C. You can use the USB - C to not only transfer audio - visual data but also charge your device. Then, choose the output you want to use - either the HDMI or the HDBaseT output. If you're using the HDBaseT output, you can pair it with the DL - HD70 - RX receiver to extend the signal. To control the switcher, you can use the front - panel buttons, the IR remote, or access the web GUI through TCP/IP. You can also use RS232 or CEC for control. When it comes to audio, you can embed the external line audio into any HDMI input and use the microphone input for voice. Just make sure the microphone has 48v Phantom Power if needed. For multi - view, select from the 16 pre - configured modes or set up a custom layout. When using in auto - switching or multi - view mode, you can use it as a 4x1+1 switcher, and for standard operation controlled via API, it works as a 6x1+1 switcher. As for maintenance, keep the device in a clean and dry place. Avoid exposing it to extreme temperatures or humidity. If there are any issues, check the connections first. If the problem persists, contact the manufacturer's support team.