The PureLink VIP-EXT-200-1 is a top - notch Full HD 1080P HDMI and USB/KM over IP Extension System. It offers high - definition video, audio, RS - 232, IR, and USB signal extension. Whether you're using a network or not, it can do point - to - point connections. The transmitter can directly connect to a receiver up to 150 meters away. Or, by using a network switch, you can double the distance to 300 meters. With video over IP extension on a network, you can easily convert the system for distribution, switching, or matrix routing, a big plus compared to other technologies. Key Features: - Achieve 1080P60 HD extension. - Extend up to 150 meters from transmitter to receiver directly, or 300 meters via a network switch. - Extend video and both stereo and multi - channel audio. - Extend keyboard, mouse, touchscreen, etc. through USB 2.0. - Extend RS232 and infrared signals. - Use built - in API diagnostics for transmitter, receiver, source, and display when extending via a network. - The receiver has a settable scaler with image rotation options. - Can be converted with extra Tx/Rx units for distribution, switching, and matrix systems. Technical Specifications: - **Hardware**: Output signal types are configurable via PureMedia universal output cards supporting HDMI, HDBaseT, Fiber, and 3G - SDI. - **Performance**: Supports distances up to 150m via CAT (transmitter direct to receiver), 300m via CAT (transmitter to network switch to receiver), 60km via Fiber (transmitter direct to receiver), and 60km via Fiber (transmitter to network switch to receiver). Supports resolutions up to 1080p, 1920x1200@60Hz. Complies with HDCP 1.3. Supports audio formats like stereo, up to 7.1 LPCM 192Khz, Dolby True HD, and DTS - HD Master Audio. - **IR Receiver (Internal)**: 20 - 60Khz/ ±45 Degrees/5M. - **IR Emitter (External)**: 3.5mm Stereo Phono Jack, 20 - 60Khz/ ±45 Degrees/5M. - **Power Consumption**: 1350mA (Typical). - **Power Supply**: DC 5V 2000mA. - **Connections**: Transmitter has (1) HDMI Type A, (1) 3.5mm Stereo Phone Jack (line - in), (1) USB 2.0 Type B, (1) RS - 232 DB9 Female. Receiver has (1) HDMI Type A, (1) 3.5mm Stereo Phone Jack (line - out), (1) Gigabit RJ45. Outputs have similar configurations. - **Enclosure**: Product dimensions for both transmitter and receiver are 5.51inch x 4.92inch x 1.18inch, and each weighs 0.84 lbs. It comes with a 3 - year limited warranty.

Using the PureLink VIP - EXT - 200 - 1 is quite straightforward. First, connect the transmitter to your source device. For example, if you're using a computer, plug in the HDMI cable to the computer's HDMI output, the 3.5mm audio cable for sound, the USB 2.0 cable for keyboard and mouse control, and the RS - 232 cable if needed. Then, connect the receiver to your display device, like a monitor, using the appropriate cables. If you want to extend the distance, you can use a network switch. Just connect the transmitter and receiver to the switch. This way, you can get up to 300 meters of extension. When it comes to maintenance, keep the device in a clean and dry place. Avoid exposing it to extreme temperatures or humidity. If there are any issues, you can use the built - in API diagnostics, especially when using the network extension. This will help you quickly identify problems with the transmitter, receiver, source, or display. Also, make sure to use the correct power supply, which is DC 5V 2000mA. Using an incorrect power supply can damage the device. And don't forget, the product comes with a 3 - year limited warranty, so if you have any major problems during this time, you can get it fixed.