The ATEN CV190 is a top - notch DisplayPort console converter. It's fully compatible with ATEN KVM switches, which use 15 - pin Special High - Density (SPHD - 15) connectors for smooth KVM data transmission between the switch and the computer. By linking to SPHD - 15 switches, the CV190 utilizes the DisplayPort and USB bus. This enables it to transfer video and keyboard/mouse input to the computer fast and reliably, all while ensuring a clean installation. Key features include connecting an ATEN SPHD - interfaced KVM switch to a DisplayPort and USB - enabled computer, supporting high - resolution video up to 1920 x 1080 @ 60Hz, being DisplayPort 1.1 compliant, supporting USB keyboard and mouse, being bus - powered (no need for an external power adapter), and easy installation without software. Technical specs show it has 1 console connection, specific connectors (1 x USB Type A Male, 1 x DisplayPort Male to the computer and 1 x SPHD - 15 Male to the switch), a slide switch for power selection, status LEDs, a video resolution of 1920 x 1080 @ 60 Hz, low power consumption, and specific environmental and physical properties like plastic housing, a weight of 0.21 kg (0.46 lb), a 1.8 m cable length, and dimensions of 9.00 x 4.30 x 2.18 cm (3.54 x 1.69 x 0.86 in.).

Using the ATEN CV190 is a breeze. First, connect the 1 x SPHD - 15 Male connector on the converter to your ATEN SPHD - interfaced KVM switch. Then, plug the 1 x USB Type A Male and 1 x DisplayPort Male connectors into your DisplayPort and USB - enabled target computer. You don't need to install any software. Once connected, the converter will start working right away as it's bus - powered, so there's no need to find an external power adapter. The status LEDs will show you the power and connection status. You can expect high - quality video up to 1920 x 1080 @ 60Hz. When it comes to maintenance, keep it in a clean and dry place. The operating temperature should be between 0 - 50 degrees C, and the storage temperature between - 20 - 60 degrees C. Make sure the humidity stays between 0 - 80% RH and non - condensing. If you're using it with rack - mount products, remember the physical dimensions are presented in a LxWxH format.