The PureLink VIP-EXT-100-1 is a top - notch Full HD 1080P HDMI over IP extension system with a wallplate transmitter. This system offers high - quality video, audio, RS - 232, and IR signal extension. It can work point - to - point, with or without a network. The wallplate transmitter can connect to a receiver up to 120 meters away. Using a network switch, the extension distance can be effectively doubled to 240 meters. One of the greatest advantages of this Video over IP technology is that it allows you to easily convert your extension system to a distribution, switching, or matrix routing system. Key Features: - Wallplate Transmitter and Receiver enclosure, powered locally or by PoE 802.3af. - Full HD 1080P60 extension for sharp visuals. - Extend up to 120 meters directly from TX to RX or 240 meters via a network switch. - Supports video and stereo audio extension. - Capable of extending RS232 and Infrared signals. - Convert to a distribution, switching, or matrix system with additional Tx/Rx units. - H.264 codec with a data rate <= 15mbps and 390mS latency. Technical Specifications: - Hardware: HDMI with embedded audio. - Cabling: Cat 5 UTP or better. - Input Signal Types: TX - HDMI v1.3; RX - RJ - 45 H.264 UDP Multicast, RS232, IR. - Output Signal Types: TX - RJ - 45 H.264 UDP Multicast; RX - HDMI v1.3. - Performance: Supports up to 120 m/390 ft, resolutions up to 1080p/1920x1080, HDCP 1.3 compliance, and audio formats up to 7.1 LPCM 192Khz/Dolby True HD/DTS - HD Master Audio. - Power Consumption: 5 VDC, 600mA typical, with PoE 802.3af support. - Enclosure: TX dimensions are 4.07” x 1.81” x 1.18” (103.5mm x 46mm x 30mm), RX dimensions are 1.1” x 4.7” x 3.1 (29 mm x 120 mm x 79 mm). Product weights are 0.36 lbs for TX and 0.61 lbs for RX. - Warranty: Limited 3 - Year Warranty.

Using the PureLink VIP - EXT - 100 - 1 is a breeze. First, connect your HDMI source to the wallplate transmitter. Then, connect the transmitter to a network switch or directly to the receiver, depending on your distance requirements. The system can work with or without a network, so you have flexibility. If you're using a network, make sure your network settings are configured properly. When it comes to distance, remember that you can reach up to 120 meters when connecting the transmitter directly to the receiver. If you use a network switch, you can double that distance to 240 meters. For maintenance, keep the system clean and free from dust. Avoid exposing it to extreme temperatures and moisture. Also, check the power supply regularly to ensure it's stable. The system is powered either locally or by PoE 802.3af, so make sure you have the right power setup. If you plan to convert the extension system to a distribution, switching, or matrix system, just add the necessary Tx/Rx units. And don't forget, the system comes with a 3 - year limited warranty, so you're covered for any potential issues.