Move your camera around the set or studio swiftly and smoothly with E-Image's Air-Assist Pedestal featuring a height-adjustment lever. This all - in - one kit includes a heavy - duty GH20 fluid head, an AT7903A tripod pedestal, an EI - 7004B tripod dolly, two padded panhandles, and a carrying bag for the pedestal legs. The GH20 fluid head has a 100mm bowl, a 44.1 lbs maximum load capacity, and a nine - position counterbalance system. It comes with a large, studio - style quick - release mounting plate for balancing big studio cameras or teleprompters. There are two rosettes to attach the padded panhandles, and the mounting plate has a 6” slide range. The fluid head also has individual locks for pan and tilt. The AT7903A pedestal features flip - lock legs and an adjustment lever, allowing you to quickly change the height from 46.2” to 78”. The “air - assist” center column dampens movement for heavy loads. The EI - 7004B dolly has three locking rubber wheels, a 132.3 lb load capacity, and a 39.4” footprint diameter. It can be removed from the legs and folded for easy transport and storage. Key features of this system include support for payloads up to 35.8 lb, easy - adjust latches for height changes, air - assisted central column control, heavy - duty locking latches, a 100mm riser bowl, a height range of 46.2” - 78”, an EI - 7004B dolly with locking wheels and cable guard, fine - tuning for counterbalance, two GB4 extendable pan handles, and a T30 carrying bag for pedestal legs. Technical specs: Shipping weight is 59 lbs, shipping dimensions are 46 x 22 x 11 inches. It includes 1 GH20 fluid head, 1 AT7903 pedestal, 1 EI - 7004B dolly, and 2 GB4 pan handles. The payload is 35.8 lbs (16.23 kg), height range is 46.2 - 78 inches, net weight is 43.4 lbs. The fluid head has a 44.1 lbs capacity, 100mm bowl, and various settings for pan and tilt. The pedestal is made of aluminum, has a 44 lbs payload capacity, and a height range of 40.2 - 72.6 inches. The dolly has a 132.3 lbs payload capacity and is made of aluminum legs, rubber wheels, and steel screws. UPC code is 847983033706.

Using the E - Image EI - GH20 - KIT is a breeze. First, assemble the tripod pedestal. Unfold the AT7903A pedestal legs and use the flip - lock mechanism to secure them. Then, adjust the height using the adjustment lever to your desired position between 46.2” and 78”. Next, attach the GH20 fluid head to the pedestal. The 100mm bowl makes for a secure fit. Connect the two padded panhandles to the rosettes on the fluid head. These panhandles will help you control the movement of your camera smoothly. If you need to move the setup around, attach the EI - 7004B dolly to the pedestal legs. The locking rubber wheels allow you to lock the dolly in place when you find the right position. The cable guards on the dolly prevent your cables from getting tangled in the wheels. When it comes to using the fluid head, adjust the counterbalance system according to the weight of your camera. The nine - position counterbalance system helps keep your camera stable. Use the individual locks for pan and tilt to hold the camera in a specific position. Now, for some important notes. Always make sure the payload doesn't exceed the specified limits. The full system supports up to 35.8 lb, the fluid head has a 44.1 lbs capacity, and the dolly can handle 132.3 lbs. Overloading can cause damage to the equipment and pose a safety risk. For maintenance, regularly check the locking latches and make sure they are tight. Clean the equipment after each use, especially the fluid head. Use a soft, dry cloth to wipe away any dust or debris. If the equipment gets wet, dry it thoroughly to prevent rusting. When storing, fold the dolly and use the T30 carrying bag for the pedestal legs to keep everything organized and protected.