The DigitaLinx DL-SDI2USB-CAP TeamUp+ Series is a top - notch commercial - grade USB capture device. It can directly connect to a computer and record uncompressed video and audio from SDI sources like cameras. This 100% USB - compliant device is a perfect match for any SDI - equipped camera, switcher, and other security and broadcast equipment. With its plug - and - play design, you don't need to install any drivers or downloads. You can stream directly from an SDI source to YouTube, Facebook, or popular video conferencing platforms such as Teams, Zoom, and Workplace. It features an SDI input with loop output and a USB 3.0 output, supports video resolutions up to 1080p/60, and is powered via a USB port. Key features include capturing audio and video SDI signals up to 1080p @60Hz using USB 3.0 technology, supporting 3G - SDI, HD - SDI, and SD - SDI signals. The SDI loopout allows easy connection to a monitor without a distribution amplifier. It uses H.264 software compression, is compatible with USB Video Class (UVC 1.0), and has low latency. It's bus - powered through a USB 3.0 interface, supports a wide range of video resolutions and audio inputs, and is fully backwards - compatible with USB 2.0. It works well with most 3rd - party software. The package includes a capture device, a USB 3.0 cable, and a user manual. It measures 107(L) x 55(W) x 21(H) mm and weighs 80g. It's a complete plug - and - play device, and the recommended 3G - SDI signal cable length has a max of 60 meters according to SDI standards.

Using the DigitaLinx DL - SDI2USB - CAP TeamUp+ Series is super easy. First, connect the device to your SDI source, like a camera, using an SDI cable. Then, plug the USB 3.0 cable into your computer. Since it's a plug - and - play device, your computer will recognize it right away without needing to install any drivers. You can start capturing video and audio signals and stream them to your favorite platforms or record them. When using the SDI loopout, you can directly connect it to a monitor without the need for an extra amplifier. As for audio, you can choose to use the embedded SDI audio or analog stereo audio. Remember, the recommended cable length for the 3G - SDI signal is important. While 60 meters is the max according to standards, the actual length may vary based on different conditions. To keep your device in good shape, keep it clean and avoid exposing it to extreme temperatures or moisture. If you're not using it for a long time, store it in a safe and dry place. And always use the provided USB 3.0 cable for power to ensure stable performance.