The Kiloview N40 is a remarkable NDI video converter. It supports up to UHD 4Kp60 video input when acting as an encoder or 4Kp60 video output as a decoder. With an overall size of just 100*80*24mm, it's incredibly compact and can easily fit in your pocket. This converter comes with an HDMI 2.0 input and HDMI 2.0 loop - through. You can view the content on the monitor while NDI streaming or use the HDMI 2.0 output during decoding. There's a built - in tally system with a large tally light to show which camera is in program or preview. It also has a 3.5mm audio input/output that supports intercom when used with Kiloview software. The Kiloview N40 has a wide DC input range from 5V to 18V. You can power it with USB, a power bank, a camera battery, or even use Power over Ethernet (PoE). It comes with a threaded screw camera mount for easy camera mounting and supports a PTZ interface via a USB adapter. This converter is also compatible with Kiloview IMS software, which simplifies device management, NDI source management, remote configuration, and upgrading. Key Features: 1. Wide DC power input range from 5V - 18V allows for flexible power sources like USB and power banks. 2. 3.5mm audio input/output and intercom supported with Kiloview software. 3. Bi - directional converting, supporting up to 4Kp30 NDI encoding/decoding (self - defined). 4. Compatibility with Kiloview IMS software for efficient device and source management. 5. Optional control cable support for PTZ control over Visca/Visca over IP/Pelco etc. Technical Specifications: Video Input: 1x HDMI; Video Output: 1x HDMI; Analog Audio: 1x 3.5mm Headphone (Out)/Microphone (Input); Network: 1*RJ45 (with POE) 100/1000Mbps Ethernet; Video Formats: Up to UHD 4Kp600 (Downward compatible with SD/HD/VESA and custom resolution); NDI Encoding and Decoding: 1x NDI encoding or 1x NDI decoding; NDICODEC Features: YCbCr 4:2:2 HD video encoding, typical bitrate: 250Mbps@4Kp60, 125Mbps@1080p60; LED Indicators: Tally, power indicator, connection status indicator; Power Supply Modes: Options for POE, DC 5 - 18v; Intercom: Support (equipped with Kiloview software); PTZ Control: Support; DHCP: Support; Management: WEB page/IMS remote management; Dimensions: 3.93 x 3.15 x 1.10” (100 x 80 x 28mm); Power Consumption: 6w; Working Temperature: - 4 Degrees to 113 Degrees F (- 20 Degrees to 45 Degrees C); Storage temperature: - 4 Degrees to 158 Degrees F (- 20 Degrees to 70 Degrees C).

Using the Kiloview N40 is a breeze. First, connect the HDMI input to your video source. If you want to monitor the video while streaming via NDI, use the HDMI 2.0 loop - through to connect to a monitor. For audio, plug in your audio device using the 3.5mm input/output port, but remember you'll need to install the Kiloview software to use the intercom feature. When it comes to power, you have multiple options. You can use a USB cable, a power bank, a camera battery, or Power over Ethernet (PoE). Just make sure the power source is within the 5V - 18V range. To mount it on a camera, use the threaded screw camera mount provided. If you want to control a PTZ camera, connect the optional control cable and select the appropriate control protocol like Visca/Visca over IP/Pelco. For managing the device, you can use the WEB page or the Kiloview IMS software for remote configuration and upgrading. Here are some important notes. Keep the device within the recommended working temperature range of - 4 Degrees to 113 Degrees F (- 20 Degrees to 45 Degrees C) and storage temperature of - 4 Degrees to 158 Degrees F (- 20 Degrees to 70 Degrees C). When using the intercom feature, ensure the Kiloview software is properly installed and configured. For maintenance, keep the device clean and free from dust. You can use a soft, dry cloth to wipe it down occasionally. If you experience any issues, refer to the user manual or contact Kiloview support.