The FiberPlex Technologies 'TKIT' bundle combines the amazing flexibility of the TD-6010 12.5 Gbps workbox with a set of application - specific SFP modules. This creates a simple and easy - to - order solution for your specific needs. It comes with AC power adapters. All TKIT boxes have a USB 2.0 Micro - B connection for monitor control. Note that this USB port is for future functionality as Fiberplex currently has no available software for it. All fiber connectors are LC duplex, and all TKIT kits include all the necessary SFPs. Where applicable, all listed TKITs have HDBNC connections and HDMI D (micro - HDMI) for HDMI connections. **Key Features** - Compliant with SMPTE 424M, 292M, and 259M. - Supports various formats like 25/625, 720p/1080i (50/59.94/60Hz), 1080p (23.98/24/15/29.97/30/50/59.94/60Hz). - HDMI/DVI input with 24 - bit (3x8 bits), RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4, BW = 150Mhz, RGB Range (Full/SMPTE), up to 8 - channel audio de - embedding (PCM), HDMI 1.4 Type D connector, HDMI Type D plug with retention, and HDCP support. - Control via serial interface including voltage and temperature monitoring. - Allows for HDMI/DVI interface configuration, EDID reading, audio mapping, and module information access. **Technical Specifications** - Storage Temperature: - 40 to 85°C - Operating Temperature: 0 to 50°C - Interface: Full - speed USB 2.0 compliant MicroB Device - Optical Modules: 2 SFP+ MSA (SFF - 8431, SFF - 8432, SFF - 8433) compliant slots with a data rate of 0 - 12.5 gigabits.

Using the Fiberplex TKIT - HDMI - M TD - 6010 is quite straightforward. First, connect the AC power adapter to the device to power it up. Then, use the provided LC duplex fiber connectors to establish the optical connection. For HDMI connections, use the HDMI D (micro - HDMI) interface. When it comes to control, you can use the serial interface to monitor voltage and temperature. And for configuration, you can access the HDMI/DVI interface settings, read EDID, map audio, and get module information. As for the USB 2.0 Micro - B connection, keep in mind that it's for future functionality, so don't expect to use it right now. For storage, make sure the temperature is between - 40°C and 85°C. When operating the device, keep the temperature within 0°C to 50°C. To maintain the device, keep it clean and free from dust. Avoid exposing it to extreme conditions. If you encounter any issues, check the connections first and make sure all the components are properly installed.